iPhone cable

cranky_smurf · **Posted:** Fri Jul 09, 2010 4:19 am

hi all just wondering if anyone has had a go with one of these setups?
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... ink:top:en

skc · **Joined:** Tue Jul 20, 2004 3:05 pm **Posts:** 188

Sounds like a good concept if it works. I hope installation is simple.

skc

Channie · **Posted:** Fri Jul 09, 2010 9:19 pm

does it work on a 03 model?

zoom · **Posted:** Sat Jul 10, 2010 6:42 pm

Channie wrote:

does it work on a 03 model?

From ebay

Quote:

Compatible Mazda's

1999-2003 Mazda 323
2003-2006 B-Series Pickup
2006-2010 CX7
2003-2009 Mazda 3
2005-2010 Mazda 5
2003-2009 Mazda 6 ( Not compatible with 2004 model )
2003-2008 Miata/MX5
2002-2010 MPV
2002-2008 Protege
2004-2008 RX8
2003-2006 Tribute

From the other thread where you asked the SAME question viewtopic.php?f=10&t=1336

zoom wrote:

Channie wrote:

so it does work on a 03 model?

There is a link to a thread on the .com forum in the first post in this thread. Did you read that?

Quote:

NOTE: The factory headunit's firmware revision must be 9.55 or greater. The unit will not work on earlier firmware revisions or with 9.81 or 10.01. To find out which revision your Mazda RX-8 has, make sure the radio (FM) is turned on, then press and hold "TEXT." Then, also press and hold "1" at the same time for a few more seconds. The LCD should then report your firmware version.

In fact that is a direct quote from the manufacturers website http://www.therpmstore.com/product_info ... cts_id=142.

If you are referring to the fact they talk about "NOTE for 2004-2005 Mazda RX-8" and dont mention 2003, its because the 2003 built cars are technically MY04.

iPhone cable

Who is online