JC Racing Working on my 8

Share pictures or videos of your cars and other general multimedia

Moderator: zoom

ms rota
Validated Member
Posts: 29
Joined: Tue Jan 20, 2009 11:29 am

Re: JC Racing Working on my 8

Post by ms rota » Tue Jul 24, 2012 5:54 pm

cant wait to do the haltech and tune!!!!

User avatar
RUKEEN
Validated Member
Posts: 598
Joined: Tue Sep 19, 2006 8:05 pm
Location: Wollongong
Contact:

Re: JC Racing Working on my 8

Post by RUKEEN » Tue Jul 24, 2012 8:17 pm

me to in stining for a run at WSID
MODS LIST
REVi Intake & Duct Combo + REV8 Exhaust System + RB- Resonated Race Pipe + JCR- Exhaust Header
RB- Suspension Package + Hawk HP Plus Pads + RB- Silicone Radiator Hose Kit + ULTRA Ignition Wires
HKS Oil Filter + RB- AC and Oil Cooler Screens + Zero II Coilover Suspension + Exedy Twin Plate Clutch
Haltech Sprint RE ECU+BHR Coils + Aeromotive 340 Fuel Pump+ Racing custom Oil Sump + Lenzo Rims

User avatar
BobsRX8GT
Validated Member
Posts: 2036
Joined: Mon Dec 19, 2011 7:37 pm
Location: Puckapunyal

JC Racing Working on my 8

Post by BobsRX8GT » Tue Jul 24, 2012 8:38 pm

Post up your time slip when done. I'm keen to see what the RX can do.
Fellow Rotor fans gather now for our daily prayer.....

As I lay rubber down the street,
I pray for traction I can keep,
But if I spin and start to slide,
Please dear god protect my sweet ride.

Amen
Image

User avatar
RUKEEN
Validated Member
Posts: 598
Joined: Tue Sep 19, 2006 8:05 pm
Location: Wollongong
Contact:

Re: JC Racing Working on my 8

Post by RUKEEN » Tue Jul 24, 2012 9:14 pm

No probs will do
MODS LIST
REVi Intake & Duct Combo + REV8 Exhaust System + RB- Resonated Race Pipe + JCR- Exhaust Header
RB- Suspension Package + Hawk HP Plus Pads + RB- Silicone Radiator Hose Kit + ULTRA Ignition Wires
HKS Oil Filter + RB- AC and Oil Cooler Screens + Zero II Coilover Suspension + Exedy Twin Plate Clutch
Haltech Sprint RE ECU+BHR Coils + Aeromotive 340 Fuel Pump+ Racing custom Oil Sump + Lenzo Rims

User avatar
RUKEEN
Validated Member
Posts: 598
Joined: Tue Sep 19, 2006 8:05 pm
Location: Wollongong
Contact:

Re: JC Racing Working on my 8

Post by RUKEEN » Thu Sep 06, 2012 5:47 pm

Getting my car Ready to Drop off to JC Racing for my Haltech Piggy Back ECU
Attachments
My RX8.JPG
MODS LIST
REVi Intake & Duct Combo + REV8 Exhaust System + RB- Resonated Race Pipe + JCR- Exhaust Header
RB- Suspension Package + Hawk HP Plus Pads + RB- Silicone Radiator Hose Kit + ULTRA Ignition Wires
HKS Oil Filter + RB- AC and Oil Cooler Screens + Zero II Coilover Suspension + Exedy Twin Plate Clutch
Haltech Sprint RE ECU+BHR Coils + Aeromotive 340 Fuel Pump+ Racing custom Oil Sump + Lenzo Rims

tim33h
Validated Member
Posts: 2397
Joined: Tue Jun 28, 2011 12:26 pm
Location: SW Sydney, NSW

Re: JC Racing Working on my 8

Post by tim33h » Fri Sep 07, 2012 8:56 am

Why is it on a trailer mate?

User avatar
RUKEEN
Validated Member
Posts: 598
Joined: Tue Sep 19, 2006 8:05 pm
Location: Wollongong
Contact:

Re: JC Racing Working on my 8

Post by RUKEEN » Fri Sep 07, 2012 10:16 am

I keep my car and trailer at my inlaws place.
The car gets parked on trailer so i dont take up to spots.
MODS LIST
REVi Intake & Duct Combo + REV8 Exhaust System + RB- Resonated Race Pipe + JCR- Exhaust Header
RB- Suspension Package + Hawk HP Plus Pads + RB- Silicone Radiator Hose Kit + ULTRA Ignition Wires
HKS Oil Filter + RB- AC and Oil Cooler Screens + Zero II Coilover Suspension + Exedy Twin Plate Clutch
Haltech Sprint RE ECU+BHR Coils + Aeromotive 340 Fuel Pump+ Racing custom Oil Sump + Lenzo Rims

User avatar
RUKEEN
Validated Member
Posts: 598
Joined: Tue Sep 19, 2006 8:05 pm
Location: Wollongong
Contact:

Re: JC Racing Working on my 8

Post by RUKEEN » Fri Sep 21, 2012 8:43 am

Here is a update pic JC Racing put on Facebook last night :o
Attachments
RX8 Dyno 2.jpg
MODS LIST
REVi Intake & Duct Combo + REV8 Exhaust System + RB- Resonated Race Pipe + JCR- Exhaust Header
RB- Suspension Package + Hawk HP Plus Pads + RB- Silicone Radiator Hose Kit + ULTRA Ignition Wires
HKS Oil Filter + RB- AC and Oil Cooler Screens + Zero II Coilover Suspension + Exedy Twin Plate Clutch
Haltech Sprint RE ECU+BHR Coils + Aeromotive 340 Fuel Pump+ Racing custom Oil Sump + Lenzo Rims

tim33h
Validated Member
Posts: 2397
Joined: Tue Jun 28, 2011 12:26 pm
Location: SW Sydney, NSW

Re: JC Racing Working on my 8

Post by tim33h » Fri Sep 21, 2012 9:04 am

Good luck mate
I hope u get the result u are after

Aydin
Posts: 36
Joined: Mon Nov 02, 2009 12:47 pm
Location: NSW

Re: JC Racing Working on my 8

Post by Aydin » Fri Sep 21, 2012 10:33 am

keen to see your results and time.

Have been talking to JC racing about tuning mine also.

User avatar
RUKEEN
Validated Member
Posts: 598
Joined: Tue Sep 19, 2006 8:05 pm
Location: Wollongong
Contact:

Re: JC Racing Working on my 8

Post by RUKEEN » Tue Oct 09, 2012 8:42 am

Aydin wrote:keen to see your results and time.

Have been talking to JC racing about tuning mine also.

You will be very happy :lol:
MODS LIST
REVi Intake & Duct Combo + REV8 Exhaust System + RB- Resonated Race Pipe + JCR- Exhaust Header
RB- Suspension Package + Hawk HP Plus Pads + RB- Silicone Radiator Hose Kit + ULTRA Ignition Wires
HKS Oil Filter + RB- AC and Oil Cooler Screens + Zero II Coilover Suspension + Exedy Twin Plate Clutch
Haltech Sprint RE ECU+BHR Coils + Aeromotive 340 Fuel Pump+ Racing custom Oil Sump + Lenzo Rims

User avatar
RUKEEN
Validated Member
Posts: 598
Joined: Tue Sep 19, 2006 8:05 pm
Location: Wollongong
Contact:

Re: JC Racing Working on my 8

Post by RUKEEN » Wed May 03, 2017 2:50 pm

Wow 5 years ago.
its been that long i forgot what my car looks like.
Good news is im bringing home to my new house so i can have a play with it again :)
MODS LIST
REVi Intake & Duct Combo + REV8 Exhaust System + RB- Resonated Race Pipe + JCR- Exhaust Header
RB- Suspension Package + Hawk HP Plus Pads + RB- Silicone Radiator Hose Kit + ULTRA Ignition Wires
HKS Oil Filter + RB- AC and Oil Cooler Screens + Zero II Coilover Suspension + Exedy Twin Plate Clutch
Haltech Sprint RE ECU+BHR Coils + Aeromotive 340 Fuel Pump+ Racing custom Oil Sump + Lenzo Rims

User avatar
spinner
Validated Member
Posts: 2205
Joined: Tue May 11, 2010 6:33 pm
Location: Wollongong

Re: JC Racing Working on my 8

Post by spinner » Thu May 04, 2017 6:30 pm

Welcome back
"The ingenious and decidedly weird Wankel rotary engine works by using internal combustion to bounce a fat metal triangle around inside a hollow metal kidney bean, which hula-hoops around a central shaft to generate power"

Post Reply